Manufactured By: John Deere
Category: Skid Steer Loader
Model Number: 328
| Make | John Deere |
| Model | 328 |
| Type | Skid Steer Loader |
| Standard Flow | 22 GPM |
| High Flow | 36 GPM |
| Pressure | 3100PSI PSI |
| Hydraulic HP Standard Flow | 40 HP |
| Hydraulic HP High Flow | 67 HP |
| Engine HP | 82 HP |
| Width | 76 in. |
| Lift Capacity at 35% | 1925 lb. |
| Lift Capacity at 50% | 2750 lb. |
| Operating Weight | 8580 lb. |
| Length With Bucket | 11.55ft in |
Bale Size
| Bale Height | 1.2 ft (0 m) |
| Bale Length – max | 4.2 ft (1 m) |
| Bale Length – min | 1.1 ft (0 m) |
| Bale Width | 1.6 ft (0 m) |
Baler Pickup
| Lift Type | crank |
| Number of Bars | 4 |
| Number of Tines | 104 |
| Overall Width | 6.3 ft (2 m) |
| Tine to Tine Width | 5.3 ft (2 m) |
Dimensions
| Clearance at Max Lift and Dump | 8.6 ft (3 m) |
| Ground Clearance | 11 in (28 cm) |
| Height – Top of Cab | 7 ft (2 m) |
| Length w/o Bucket | 9.7 ft (3 m) |
| Length with Bucket | 11.6 ft (4 m) |
| Overall Height | 5.6 ft (2 m) |
| Overall Length | 19 ft (6 m) |
| Overall Width | 9 ft (3 m) |
| Reach at Max Lift and Dump | 32.1 in (82 cm) |
| Tractor PTO Power Required | 35 hp (26 kw) |
| Turning Radius from Center – inc bucket | 83.8 in (213 cm) |
| Weight | 2663.2 lbs (1,208 kg) |
| Wheelbase | 4 ft (1 m) |
| Width Over Tires | 6.4 ft (2 m) |
Engine
| Aspiration | Turbocharged |
| Displacement | 186 cu in (0 m) |
| Engine Model | 5030TW |
| Gross Power | 76 hp (57 kw) |
| Number of Cylinders | 5 |
| Power Measured @ | 2800 rpm |
Feeding Chamber
| Feed Opening | 294.6 cu in (0 m) |
Hydraulic System
| Pump Flow Capacity | 22 gal/min (83 l/min) |
| Relief Valve Pressure | 3100 psi |
Loader
| Breakout Force | 10500 psi |
| Bucket Capacity | 0.7 cu yds (1 m) |
| Operating Load Rating | 2750 lbs (1,247 kg) |
| Tipping Angle | 5500 ° |
Operating Specifications
| Alternator Supplied Amperage | 70 A |
| Fuel Capacity | 24 gal (91 l) |
| Max Speed | 12 mph (19 kph) |
| Operating Voltage | 12 V V |
| Operational Weight | 8580 lbs (3,892 kg) |
| Tire Size | 14×17.5 12PR |
Plunger
| Bearing Type | sealed ball-bearing rollers |
| SPM | 80 |
| Stroke Length | 76 CENTIMETERS |
Wrapping System
| Twine Ball Capacity | 4 |
| Twine Type | plastic or sisal |