Manufactured By: Caterpillar
Category: Compact Track Loader
Model Number: 287D
| Make | Caterpillar |
| Model | 287D |
| Type | Compact Track Loader |
| Standard Flow | 23 GPM |
| High Flow | 32 GPM |
| Pressure | 3335PSI PSI |
| Hydraulic HP Standard Flow | 44 HP |
| Hydraulic HP High Flow | 76 HP |
| Engine HP | 72. HP |
| Width | 78 in. |
| Lift Capacity at 35% | 2800 lb. |
| Lift Capacity at 50% | 4000 lb. |
| Operating Weight | 9929 lb. |
| Tire Size |
Cab
| FOPS | ISO 3449:2005 Level I |
| FOPS Level II | ISO 3449:2005 Level II |
| ROPS | ISO 3471:2008 |
Dimensions
| Bucket Pin Height – Carry Position | 7.5 in (19 cm) |
| Bucket Pin Height – Maximum Lift | 10.5 ft (3 m) |
| Bucket Pin Reach – Maximum Lift | 15.4 in (39 cm) |
| Clearance at Maximum Lift and Dump | 94 in (239 cm) |
| Departure Angle | 38 ° |
| Ground Clearance | 0.8 ft in (2 cm) |
| Height – Top of Cab | 7 ft (2 m) |
| Length – Track on Ground | 71.1 in (181 cm) |
| Length – With Bucket on Ground | 146.2 in (371 cm) |
| Length – Without Bucket | 117.9 in (299 cm) |
| Maximum Dump Angle | 51 ° |
| Maximum Overall Height | 158.1 in (402 cm) |
| Maximum Reach – With Arms Parallel to Ground | 50.9 in (129 cm) |
| Note | # |
| Overall Length – Track | 90 in (229 cm) |
| Rack Back Angle – Maximum Height | 84 ° |
| Reach – Maximum Lift/Dump | 30.8 in (78 cm) |
| Turning Radius from Center – Bucket | 92 in (234 cm) |
| Turning Radius from Center – Coupler | 58.8 in (149 cm) |
| Turning Radius from Center – Machine Rear | 67.4 in (171 cm) |
| Vehicle Width | 78 in (198 cm) |
Engine
| Bore | 3.7 in (9 cm) |
| Displacement | 203 cu in (0 m) |
| Engine Model | Cat C3.3B DIT (turbo) |
| Gross Power | 74.3 hp (55 kw) |
| Gross Power – SAE J1995 | 74.3 hp (55 kw) |
| Net Power | 72.9 hp (54 kw) |
| Net Power – ISO 9249 | 73.7 hp (55 kw) |
| Net Power – SAE 1349 | 72.9 hp (54 kw) |
| Peak Torque – 1,500 rpm – SAE J1995 | 195 ft lbs (89 kg) |
| Stroke | 4.7 in (12 cm) |
Hydraulic System
| Hydraulic Flow – High Flow XPS – Hydraulic Power (Calculated) | 76 hp (57 kw) |
| Hydraulic Flow – High Flow XPS – Maximum Loader Hydraulic Flow | 32 gal/min (121 l/min) |
| Hydraulic Flow – High Flow XPS – Maximum Loader Hydraulic Pressure | 4061 psi |
| Hydraulic Flow – Standard – Hydraulic Power (Calculated) | 44 hp (33 kw) |
| Hydraulic Flow – Standard – Loader Hydraulic Flow | 23 gal/min (87 l/min) |
| Hydraulic Flow – Standard – Loader Hydraulic Pressure | 3335 psi |
Noise Level
| Inside Cab* | 81 dB(A) |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab** | 103 dB(A) |
Operating Specifications
| Breakout Force – Tilt Cylinder | 7291 lbs (3,307 kg) |
| Ground Contact Area | 2561 cu in (0 m) |
| Ground Pressure | 3.9 psi |
| Note | # |
| Rated Operating Capacities – 35% Tipping Load | 2800 lbs (1,270 kg) |
| Rated Operating Capacities – 50% Tipping Load | 4000 lbs (1,814 kg) |
| Rated Operating Capacity with Optional Counterweight | 4250 lbs (1,928 kg) |
| Tipping Load | 8000 lbs (3,629 kg) |
Power Train
| Travel Speed – Forward or Reverse – One Speed | 5.2 mph (8 kph) |
| Travel Speed – Forward or Reverse – Two Speed | 8 mph (13 kph) |
Service Refill Capacities
| Cooling System | 3.7 gal (14 l) |
| Engine Crankcase | 3 gal (11 l) |
| Fuel Tank | 24.8 gal (94 l) |
| Hydraulic System | 13.7 gal (52 l) |
| Hydraulic Tank | 10.3 gal (39 l) |